Pre Wired Control plate and harness for Bass Guitars

Wired and setup harness for Bass passive pickups (2 pickup)
Includes control plate, screws, potentiometers (3 each, 2 volume, 1 tone), capacitor (1 .068uF), jack (import style), ground wires
Note: Does not include pickups (order separately.
Professionally wired setup for two bass passive pickups either standard or hot output.
Chrome Finish

Wiring Harness for Passive Bass guitars

Pre-wired Control plate for JBass® and other Bass guitars.

2 Volume potentiometer (B500K)
1 Tone potentiometer (A500K)
Control plate (our 085012cH) with chrome knurled knobs.
Jack, import style.
3 Mounting screws in chrome

Poly film capacitor at .068uF

Prewired, ready for pickups (not included). Soldering will be required, you will need to have equipment and intermediate skills for finish the wiring for your pickups you supply. (pickups are not included in this set.)

Specifications:

Wired for Bass passive pickups (standard or hot)
Passive pickup setup


Capacitor .068uF Poly Film
16mm potentiometers (2 Volume are B500K, Tone is A 500K)
Import jack pre wired
Ground wire installed for bridge

3 chrome mounting screws

Plate description:

Metal, Bass Chrome Plated
Plate size is standard 5.936" (150.8mm or 5 15/16") x 2.67" (68mm or 2 43/64")
Upper Mounting holes are on 1.963" (49.9mm or 1 15/16")
Plate thickness is 5/64" (2.2mm)

Knob description:

Die Cast metal knob, 6mm push on.
Chrome finish
18mm x 18mm (11/16")

PLEASE NOTE: You will need to solder and assemble the pickup wiring on this product. The product is assembled and wired as far as possible for the application, you will have to supply and solder (wire) the additional connections for your pickups (not supplied with unit, order separately)
It will require intermediate skills at soldering to hook up your pickups to this item. An additional jack is supplied if you prefer a different setup. You will need to solder this as well.

PLEASE NOTE:
This does not include pickups, you will need to order passive pickups separately for this unit.
This will handle 2 wire passive single coil pickups standard or hot versions.











The trademarks, service marks or registered trademarks are those of their respective owners.

These parts are made by or for Bitterroot Guitars. They do not originate from any OEM manufacturers.