Mandolin Nut Right Hand 30mm
Natural Bone Material
For Acoustic or Electric setups 8 string
.156" Thickness (just under 4.0mm, 5/32")
.305" Height (19/64" or 7.75mm) in middle
1.21" length (1 13/64" or 30.6mm)
Right Hand setup
It is pre-shaped and pre-sized
Bone Mandolin Nut
.156" Thickness (just under 4.0mm, 5/32")
.305" Height (19/64" or 7.7mm) in middle
1st string height is .281" (9/32" (7.1mm)) at top edge of nut
8 th string height is .298" (19/64" (7.6mm)) at top edge of nut
1.21" width (1 13/64" or 30.7mm)
String spread is .1" Typical for width of nut
Radius 12"
Depending on your mandolin, you may have to sand for height or adjust string slot cut for setup.
Note: This is a flat bottom nut similar to many modern mandolin setups,
Natural Shaped, Slotted Oxen Bone Material.
This Product may contain a chemical known to the State of California to cause cancer and/or birth defects or other reproductive harm.
For more info go to www.P65Warnings.ca.gov
The parts on this site are made by or for Bitterroot Guitars.
These parts do not originate from the original OEM manufactures unless specifically identified as such.
Fender®, Strat®, Stratocaster®, Esquire®, Telecaster®, Tele®, Jazzmaster®, Jaguar®, Mustang®, P-Bass®, and J-Bass® are registered trademarks of Fender Musical Instruments Corporation.
Gibson®, Epiphone®, Les Paul®, S.G.®, Flying V®, ES-175®, ES-335® and P-90® are registered trademarks of Gibson Guitar Corporation
Kluson® is a registered trademark of W.D. Music Incorporated
LM®, SURELOCK® are registered trademarks of LM Products Company Incorporated
Lock-It® is a registered trademarks of Musical Distributors Group
Martin® is a registered trademark of Martin Guitar Company
S.I.T. Strings® is a registered trademark of S.I.T. Strings Company, Incorporated
Tusq is a registered trademark of Graphtech Guitar Labs