Guitar Nut Right Hand 43.5mm M Style Tilt Back
Angled Bottom
Bone
Modern Martin® Style Tilt Back
.25" Thickness (6.35mm (1/4")
.336" Height (8.5mm or 21/64") in middle front, tilt back is .403" (10.2mm 13/32")
Tilt back is approximately 12 degrees, Edges are beveled to fit headstock.
1.71" length (43.4mm or 1 45/64")
This is a bone nut, the product is formed with Bone material.
It is pre-shaped and pre-sized.
Please note there are a number of width and slot sizes produced for M type guitars, please check the drawing detail for fit for your application.
This product is produced for Bitterroot Guitars.
We are not associated with the original manufacturer, these parts originate from our suppliers only.
Specifications:
Oxen Bone Nut
Modern Martin® Style Tilt Back
.25" Thickness (6.35mm (1/4")
.336" Height (8.5mm or 21/64") in middle front, tilt back is .403" (10.2mm 13/32")
Tilt back is approximately 12 degrees, Edges are beveled to fit headstock.
1.71" length (43.4mm or 1 45/64")
1st string height is .294" (Just under 19/64" (7.5mm) at top edge of nut)6th string height is .327" (just under 21/64" (8.3mm) at top edge of nut
String spread is 1.461" Typical for width of nut (1 29/64" or 46.1mm)
String slots are set for 12-50 gauge cut.
Radius 18"
Depending on your guitar, you may have to sand for height or adjust string slot cut for setup.
Note: This is a angled sloped bottom nut similar to many modern M Style nuts wtih a tilted back headstock
The parts on this site are made by or for Bitterroot Guitars.
These parts do not originate from the original OEM manufactures unless specifically identified as such.
Fender®, Strat®, Stratocaster®, Esquire®, Telecaster®, Tele®, Jazzmaster®, Jaguar®, Mustang®, P-Bass®, and J-Bass® are registered trademarks of Fender Musical Instruments Corporation.
Gibson®, Epiphone®, Les Paul®, S.G.®, Flying V®, ES-175®, ES-335® and P-90® are registered trademarks of Gibson Guitar Corporation
Kluson® is a registered trademark of W.D. Music Incorporated
LM®, SURELOCK® are registered trademarks of LM Products Company Incorporated
Lock-It® is a registered trademarks of Musical Distributors Group
Martin® is a registered trademark of Martin Guitar Company
S.I.T. Strings® is a registered trademark of S.I.T. Strings Company, Incorporated
