Nut, for Bass Guitars, Right Hand 4 String
Graphite Composite Resin
Pre-Slotted string locations.
42mm or 1 21/32" (just over 1 5/8")
Specifications:
Overall width 1 21/32" (42mm or just over 1 5/8")
Overall height 0.369" (just under 3/8" or 9.3mm)
Graphite composite resin nut. (plastic resin with graphite)
Pre-slotted for standard 4 string setup
Overall height at string 1 - 0.33" (21/64" or 8.4mm)
Overall height at string 4 - 0.331" (21/64" or 8.4mm)
Upper radius (string) is 9.5"
Overall Thickness is .236" (6mm or 15/64")
Flat Bottom
Ledge or Shelf style mount
Fits many Generic setups.
Please note, you may have to sand or adjust slotting depending upon your setup.
Overall width 1 21/32" (42mm or just over 1 5/8")
Overall height 0.369" (just under 3/8" or 9.3mm)
Graphite nut.
Pre-slotted for standard 4 string setup
Overall height at string 1 - 0.33" (21/64" or 8.4mm)
Overall height at string 4 - 0.331" (21/64" or 8.4mm)
Upper radius (string) is 9.5"
Overall Thickness is .236" (6mm or 15/64")
Flat Bottom
Ledge or Shelf style mount
Fits many Generic setups.
Please note, you may have to sand or adjust slotting depending upon your setup.
The parts on this site are made by or for Bitterroot Guitars.
These parts do not originate from the original OEM manufactures unless specifically identified as such.
Fender®, Strat®, Stratocaster®, Esquire®, Telecaster®, Tele®, Jazzmaster®, Jaguar®, Mustang®, P-Bass®, and J-Bass® are registered trademarks of Fender Musical Instruments Corporation.
Gibson®, Epiphone®, Les Paul®, S.G.®, Flying V®, ES-175®, ES-335® and P-90® are registered trademarks of Gibson Guitar Corporation
Kluson® is a registered trademark of W.D. Music Incorporated
LM®, SURELOCK® are registered trademarks of LM Products Company Incorporated
Lock-It® is a registered trademarks of Musical Distributors Group
Martin® is a registered trademark of Martin Guitar Company
S.I.T. Strings® is a registered trademark of S.I.T. Strings Company, Incorporated