Nut, for Bass Guitars, 1 9/16" Left Hand 4 String
Molded Resin Graphite (plastic withe embedded graphite)
Pre-Slotted string locations.
40mm or 1 9/16"
Specifications:
Left Hand
Overall width 1 9/16" (40.0mm or 1.575")
Overall Height .351" (8.9mm or 11/32")
Overall Thickness .234" (6mm or 15/64")
Molded Graphite nut.
Pre-slotted for standard 4 string setup
Overall height at string 1 - 0.304" (slightly over 19/64" or 7.7mm)
Overall height at string 4 - 0.350" (just over 11/32" or 8.9m)
Upper radius (string) is 16"
Flat Bottom
String Spread: 1.215" (31.9mm just under 1 7/32")
Preslotted for .040-.105
Fits many Import and US models with shelf type nut.
Please note, you may have to sand or adjust slotting depending upon your setup.
The parts on this site are made by or for Bitterroot Guitars.
These parts do not originate from the original OEM manufactures unless specifically identified as such.
Fender®, Strat®, Stratocaster®, Esquire®, Telecaster®, Tele®, Jazzmaster®, Jaguar®, Mustang®, P-Bass®, and J-Bass® are registered trademarks of Fender Musical Instruments Corporation.
Gibson®, Epiphone®, Les Paul®, S.G.®, Flying V®, ES-175®, ES-335® and P-90® are registered trademarks of Gibson Guitar Corporation
Kluson® is a registered trademark of W.D. Music Incorporated
LM®, SURELOCK® are registered trademarks of LM Products Company Incorporated
Lock-It® is a registered trademarks of Musical Distributors Group
Martin® is a registered trademark of Martin Guitar Company
S.I.T. Strings® is a registered trademark of S.I.T. Strings Company, Incorporated