Nut, Brass for Bass Guitars, 1 9/16" Right Hand 4 String
Die Cast Brass Metal
Pre-Slotted string locations.
40mm or 1 9/16"
Specifications:
Right Hand
Overall width 1 9/16" (39.9mm or 1.573")
Overall Height .351" (8.9mm or 23/64")
Overall Thickness .225" (5.7mm or 7/32")
Die Cast Brass Metal nut.
Pre-slotted for standard 4 string setup
Overall height at string 1 - 0.332" (slightly over 21/64" or 8.4mm)
Overall height at string 4 - 0.357" (just over 11/32" or 9.0mm)
Upper radius (string) is 16"
Flat Bottom
Radius 16"
String Spread: 1.20" (30.5mm just under 1 13/64")
Preslotted for .040-.105
Fits many Import and US models with shelf type nut.
Please note, you may have to sand or adjust slotting depending upon your setup.
Right Hand
Overall width 1 9/16" (39.9mm or 1.573")
Overall Height .351" (8.9mm or 23/64")
Overall Thickness .225" (5.7mm or 7/32")
Die Cast Brass Metal nut.
Pre-slotted for standard 4 string setup
Overall height at string 1 - 0.332" (slightly over 21/64" or 8.4mm)
Overall height at string 4 - 0.357" (just over 11/32" or 9.0mm)
Upper radius (string) is 16"
Flat Bottom
Radius 16"
String Spread: 1.20" (30.5mm just under 1 13/64")
Preslotted for .040-.105
Fits many Import and US models with shelf type nut.
Please note, you may have to sand or adjust slotting depending upon your setup.
The trademarks, service marks or registered trademarks are those of their respective owners.
The parts on this site are made by or for Bitterroot Guitars.
These parts do not originate from the original OEM manufactures unless specifically identified as such.
Fender®, Strat®, Stratocaster®, Esquire®, Telecaster®, Tele®, Jazzmaster®, Jaguar®, Mustang®, P-Bass®, and J-Bass® are registered trademarks of Fender Musical Instruments Corporation.
Gibson®, Epiphone®, Les Paul®, S.G.®, Flying V®, ES-175®, ES-335® and P-90® are registered trademarks of Gibson Guitar Corporation
Kluson® is a registered trademark of W.D. Music Incorporated
LM®, SURELOCK® are registered trademarks of LM Products Company Incorporated
Lock-It® is a registered trademarks of Musical Distributors Group
Martin® is a registered trademark of Martin Guitar Company
S.I.T. Strings® is a registered trademark of S.I.T. Strings Company, Incorporated
The parts on this site are made by or for Bitterroot Guitars.
These parts do not originate from the original OEM manufactures unless specifically identified as such.
Fender®, Strat®, Stratocaster®, Esquire®, Telecaster®, Tele®, Jazzmaster®, Jaguar®, Mustang®, P-Bass®, and J-Bass® are registered trademarks of Fender Musical Instruments Corporation.
Gibson®, Epiphone®, Les Paul®, S.G.®, Flying V®, ES-175®, ES-335® and P-90® are registered trademarks of Gibson Guitar Corporation
Kluson® is a registered trademark of W.D. Music Incorporated
LM®, SURELOCK® are registered trademarks of LM Products Company Incorporated
Lock-It® is a registered trademarks of Musical Distributors Group
Martin® is a registered trademark of Martin Guitar Company
S.I.T. Strings® is a registered trademark of S.I.T. Strings Company, Incorporated
1 Review Hide Reviews Show Reviews
-
Brass Nut Bass guitar RH
Brass nut is definitely made of real brass had to do some adjustments to it (as normal for a premade nut) length was about a 1000’th of an inch off but not enough to effect anything fits my guitar had to adjust the radius which is also normal for a premade nut my bass guitar has some very odd specs and this was the only brass nut that I could find to fit very good customer service and got 15 percent off my next purchase I would order from these people over and over and over again
