Inlay Flexible Purling Laminated White MOP 1.9mm wide
White Mother of Pearl Flexible Material
Laminated to flexible backer and mounting
Nice Inlay purling for edge and rosette builiding for acoustic and electric guitars
Set contains 2 rolls of flexible laminate approximately 63" total of material.
Specifications:
2 Piece Flexible laminated guitar purfling White Mother of Pearl (MOP)
2 Piece Flexible laminated guitar purfling White Mother of Pearl (MOP)
Length for each piece is 31.496" in length, two pieces in set.
1.9mm width
Part dimensions are:
0.0748" (just under 5/64" or 1.9mm) x 31.496" (31 1/2" or 800mm) flexible purfling laminated WMOP to backer and filiment.
0.063" Thickness (just over 1/16" or 1.6mm) Shell material is approximately 50% of the thickness, the remainder is a backer and flexible filament
White Mother of Pearl natural shell material laminated to flexible backer.
Part dimensions are:
0.0748" (just under 5/64" or 1.9mm) x 31.496" (31 1/2" or 800mm) flexible purfling laminated WMOP to backer and filiment.
0.063" Thickness (just over 1/16" or 1.6mm) Shell material is approximately 50% of the thickness, the remainder is a backer and flexible filament
White Mother of Pearl natural shell material laminated to flexible backer.
PLEASE NOTE: This is cut from Natural Mother of pearl shell, there will be variations in all pieces due to the nature of using a natural product. Variations will occur in all sets.
Due to size and shape some variation in size can also happen.
PLEASE NOTE: This is a laminated product (not solid). Skill will be required to properly cut and edge and install this product flush to the body of the musical instrument. The shell material is about 50% of the overall thickness, mounting too high or low can result in damage to this material.
PLEASE NOTE: This is a laminated product (not solid). Skill will be required to properly cut and edge and install this product flush to the body of the musical instrument. The shell material is about 50% of the overall thickness, mounting too high or low can result in damage to this material.
This product will curve to most applications, although tight radius's will require some piecing to create.
The trademarks, service marks or registered trademarks are those of their respective owners.
The parts on this site are made by or for Bitterroot Guitars.
These parts do not originate from the original OEM manufactures unless specifically identified as such.
Fender®, Strat®, Stratocaster®, Esquire®, Telecaster®, Tele®, Jazzmaster®, Jaguar®, Mustang®, P-Bass®, and J-Bass® are registered trademarks of Fender Musical Instruments Corporation.
Gibson®, Epiphone®, Les Paul®, S.G.®, Flying V®, ES-175®, ES-335® and P-90® are registered trademarks of Gibson Guitar Corporation
Kluson® is a registered trademark of W.D. Music Incorporated
LM®, SURELOCK® are registered trademarks of LM Products Company Incorporated
Lock-It® is a registered trademarks of Musical Distributors Group
Martin® is a registered trademark of Martin Guitar Company
S.I.T. Strings® is a registered trademark of S.I.T. Strings Company, Incorporated
The parts on this site are made by or for Bitterroot Guitars.
These parts do not originate from the original OEM manufactures unless specifically identified as such.
Fender®, Strat®, Stratocaster®, Esquire®, Telecaster®, Tele®, Jazzmaster®, Jaguar®, Mustang®, P-Bass®, and J-Bass® are registered trademarks of Fender Musical Instruments Corporation.
Gibson®, Epiphone®, Les Paul®, S.G.®, Flying V®, ES-175®, ES-335® and P-90® are registered trademarks of Gibson Guitar Corporation
Kluson® is a registered trademark of W.D. Music Incorporated
LM®, SURELOCK® are registered trademarks of LM Products Company Incorporated
Lock-It® is a registered trademarks of Musical Distributors Group
Martin® is a registered trademark of Martin Guitar Company
S.I.T. Strings® is a registered trademark of S.I.T. Strings Company, Incorporated
