Screws, Mounting for use with many Tailpiece, Trim Rings and other applications.
Package of one dozen screws
Chrome Finish
#3 x 18mm ( just over 11/16") long
Specification:
Standard use mandolin tailpiece, trim rings, small thin jack plates and pickguard mounting brackets for musical instruments.
2.6mm diameter (#3) by 18mm length (just over 11/16")
Flat head phillips screw setup. (use #1 Philips tip)
Thread diameter .103"
Root is .083"
Overall length is .70" (45/64")
Pan Head with #1 phillips.
Chrome Finish
Requires good quality #1 phillips screw driver tip
We recommend you use a #45 or #44 drill bit to tap the mounting hole for this product.
It is recommended you wax this screw when mounting in a new location.
Standard use mandolin tailpiece, trim rings, small thin jack plates and pickguard mounting brackets for musical instruments.
2.6mm diameter (#3) by 18mm length (just over 11/16")
Flat head phillips screw setup. (use #1 Philips tip)
Thread diameter .103"
Root is .083"
Overall length is .70" (45/64")
Pan Head with #1 phillips.
Chrome Finish
Requires good quality #1 phillips screw driver tip
We recommend you use a #45 or #44 drill bit to tap the mounting hole for this product.
It is recommended you wax this screw when mounting in a new location.
This Product may contain a chemical known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more info go to www.P65Warnings.ca.gov
