Guitar Nut Left Hand 43mm
Modern Electric 12 Radius
0.232" Thickness (5.9mm (15/64")
0.335" Height (21/64" or 8.5m) in middle
1.693" length (1 11/16" or 43.0mm)
This is a resin (plastic) nut.
It is pre-shaped and pre-sized.
This product is produced for Bitterroot Guitars.
We are not associated with the original manufacturer; these parts originate from our suppliers only.
These are not made by the original OEM suppliers.
Resin Nut (plastic)
1.693" width (1 11/16" 43.0mm)
0.232" thickness (5.9mm or 15/64")
0.335" height (21/64" or 8.5mm) in middle
1st string height is 0.32" (just over 5/16" (8.1mm)) at top edge of nut
6th string height is 0.348" (8.4mm (21/64")
String spread is 1 3/8 (35.3mm) Typical for width of nut
String slots are set for 10-50 gauge cut.
Radius 12"
Depending on your guitar, you may have to sand for height or adjust string slot cut for setup.Note: This is a flat bottom nut similar to many modern G Style nuts, it is not tapered to fit older designs.
Molded Resin Material.
Any reference to a manufacturer is for the purposes of identifying a cross reference for this product, these products are made for us and do not originate from the OEM supplier or source.
The parts on this site are made by or for Bitterroot Guitars.
These parts do not originate from the original OEM manufactures unless specifically identified as such.
Fender®, Strat®, Stratocaster®, Esquire®, Telecaster®, Tele®, Jazzmaster®, Jaguar®, Mustang®, P-Bass®, and J-Bass® are registered trademarks of Fender Musical Instruments Corporation.
Gibson®, Epiphone®, Les Paul®, S.G.®, Flying V®, ES-175®, ES-335® and P-90® are registered trademarks of Gibson Guitar Corporation
Kluson® is a registered trademark of W.D. Music Incorporated
LM®, SURELOCK® are registered trademarks of LM Products Company Incorporated
Lock-It® is a registered trademarks of Musical Distributors Group
Martin® is a registered trademark of Martin Guitar Company
S.I.T. Strings® is a registered trademark of S.I.T. Strings Company, Incorporated