Nut, Flat Bottom, 1 11/16", 43.1mm x 8.9 x 5.9mm

Bone for Electric Guitars 12" radius, Right Hand

Natural Carved and Shaped Oxen Bone

Pre-Slotted string locations.

Specifications:

Right Hand 6 string electric guitar setup
Overall width 1 11/16" (43.1mm)
Carved and Shaped Oxen Bone nut.
Pre-slotted for standard string setup

Overall width 1.697" (43.1mm or slightly over 1 11/16")
Overall Depth is 0.232" (5.9mm or 15/64")Height at center is 0.349" (8.9mm or just over 11/32")
Overall height at string 1 (High E) - 0.315" (8.0mm or 5/16")
Overall height at string 6 (Low E) - 0.338" (8.6mm or slightly over 21/64")
Upper radius (string) is approximately 12"
String Spread 1.38" (35mm 1 3/8")
Bottom edge is flat

Carved and shaped from Natural Oxen Bone

Please note: due to the variations in guitar setups, you may need to sand or adjust this part to fit your specific guitar. There are a number of radius and bottom setups, widths and other details that vary from guitar manufacturers, if you have questions, please email us, we will try to answer your questions as to fit, we cannot guarantee fit for specific guitars, there are so many variations from year to year and model to model.

You may need to adjust this product to fit your specific application.




This Product may contain a chemical known to the State of California to cause cancer and/or birth defects or other reproductive harm.
For more info go to www.P65Warnings.ca.gov