Nut Guitar Bone Acoustic Angled Bottom Martin Style 46 mm 1 13/16 RH

Bitterroot Guitars

MSRP: $16.99
$6.99
(You save $10.00 )
(No reviews yet) Write a Review
SKU:
108804
UPC:
821555047964
Availability:
Usually Ships in 1 to 2 Business Days
Bulk Pricing:
Buy in bulk and save
Adding to cart… The item has been added

Guitar Nut Right Hand 43.5mm M Style Tilt Back

Angled Bottom

Bone

Modern Martin® Style Tilt Back

.25" Thickness (6.35mm (1/4")
.336" Height (8.5mm or 21/64") in middle front, tilt back is .403" (10.2mm 13/32")

Tilt back is approximately 12 degrees, Edges are beveled to fit headstock.

1.812" length (46mm or 1 13/16")

This is a bone nut, the product is formed with Bone material.
It is pre-shaped and pre-sized.

Please note there are a number of width and slot sizes produced for M type guitars, please check the drawing detail for fit for your application.

This product is produced for Bitterroot Guitars.
We are not associated with the original manufacturer, these parts originate from our suppliers only.

Specifications:

Right Hand

Oxen Bone Nut

Modern Martin® Style Tilt Back

.25" Thickness (6.35mm (1/4")
.336" Height (8.5mm or 21/64") in middle front, tilt back is .403" (10.2mm 13/32")

Tilt back is approximately 12 degrees, Edges are beveled to fit headstock.

1.812" length (46mm or 1 13/16")

1st string height is .32" (Just under 21/64" (8.1mm) at top edge of nut)
6th string height is .327" (just under 21/64" (8.3mm) at top edge of nut

String spread is 1.527" Typical for width of nut (1 33/64" or 38.8mm)

String slots are set for 12-50 gauge cut.

Radius 18"


Depending on your guitar, you may have to sand for height or adjust string slot cut for setup.

Note: This is a angled sloped bottom nut similar to many modern M Style nuts wtih a tilted back headstock
 
Natural Material
 
This Product may contain a chemical known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more info go to www.P65Warnings.ca.gov
 
The trademarks, service marks or registered trademarks are those of their respective owners.

The parts on this site are made by or for Bitterroot Guitars.

These parts do not originate from the original OEM manufactures unless specifically identified as such.

Fender®, Strat®, Stratocaster®, Esquire®, Telecaster®, Tele®, Jazzmaster®, Jaguar®, Mustang®, P-Bass®, and J-Bass® are registered trademarks of Fender Musical Instruments Corporation.

Gibson®, Epiphone®, Les Paul®, S.G.®, Flying V®, ES-175®, ES-335® and P-90® are registered trademarks of Gibson Guitar Corporation

Kluson® is a registered trademark of W.D. Music Incorporated

LM®, SURELOCK® are registered trademarks of LM Products Company Incorporated

Lock-It® is a registered trademarks of Musical Distributors Group

Martin® is a registered trademark of Martin Guitar Company

S.I.T. Strings® is a registered trademark of S.I.T. Strings Company, Incorporated