Nut, for Bass Guitars
Molded resin with embedded graphite (plastic)
Pre-Slotted string locations.
43mm or 1 11/16"
Specifications:
Right Hand
Overall width 1.69" (1 11/16" or 43mm)
Overall thickness 0.13" (3.3mm or just over 1/8")
Overall height 0.245" (6.2mm or just over 15/64")
Radius 12"
Molded Resin with embedded graphite nut.
Pre-slotted for standard 4 string setup
Overall height at string 1 - 0.201" (13/64" or 5mm)
Overall height at string 4 - 0.241" (15/64" or 6.1mm)
Upper radius (string) is 12"
Flat Bottom
Pre slotted for .035-.105
Fits many P and J Bass setups
Please note, you may have to sand or adjust slotting depending upon your setup.
Right Hand
Overall width 1.69" (1 11/16" or 43mm)
Overall thickness 0.13" (3.3mm or just over 1/8")
Overall height 0.245" (6.2mm or just over 15/64")
Radius 12"
Molded Resin with embedded graphite nut.
Pre-slotted for standard 4 string setup
Overall height at string 1 - 0.201" (13/64" or 5mm)
Overall height at string 4 - 0.241" (15/64" or 6.1mm)
Upper radius (string) is 12"
Flat Bottom
Pre slotted for .035-.105
Fits many P and J Bass setups
Please note, you may have to sand or adjust slotting depending upon your setup.
The parts on this site are made by or for Bitterroot Guitars.
These parts do not originate from the original OEM manufactures unless specifically identified as such.
Fender®, Strat®, Stratocaster®, Esquire®, Telecaster®, Tele®, Jazzmaster®, Jaguar®, Mustang®, P-Bass®, and J-Bass® are registered trademarks of Fender Musical Instruments Corporation.
Gibson®, Epiphone®, Les Paul®, S.G.®, Flying V®, ES-175®, ES-335® and P-90® are registered trademarks of Gibson Guitar Corporation
Kluson® is a registered trademark of W.D. Music Incorporated
LM®, SURELOCK® are registered trademarks of LM Products Company Incorporated
Lock-It® is a registered trademarks of Musical Distributors Group
Martin® is a registered trademark of Martin Guitar Company
S.I.T. Strings® is a registered trademark of S.I.T. Strings Company, Incorporated