Nut, for Bass Guitars, Right Hand 4 String
Molded Resin with Graphite
Pre-Slotted string locations.
38mm or 1 1/2"
Specifications:
Overall width 1 1/2" (38mm or just under 1 1/2")
Overall Height 13/64" (5.3mm)Molded Resin with Graphite.
Pre-slotted for standard 4 string setup
Overall height at string 1 - 0.171" (11/64" or 4.3mm)
Overall height at string 4 - 0.205" (13/64" or 5.2mm)
Upper radius (string) is 16"
Overall Thickness is .134" (3.4mm or slightly less than 9/64")
Flat Bottom
Preslotted
Fits many Many Narrow J Bass setups (Please note there are many different Setups for J Bass, please verify the sizes for fit.)
Please note, you may have to sand or adjust slotting depending upon your setup.
Overall width 1 1/2" (38mm or just under 1 1/2")
Overall Height 13/64" (5.3mm)Molded Resin with Graphite.
Pre-slotted for standard 4 string setup
Overall height at string 1 - 0.171" (11/64" or 4.3mm)
Overall height at string 4 - 0.205" (13/64" or 5.2mm)
Upper radius (string) is 16"
Overall Thickness is .134" (3.4mm or slightly less than 9/64")
Flat Bottom
Preslotted
Fits many Many Narrow J Bass setups (Please note there are many different Setups for J Bass, please verify the sizes for fit.)
Please note, you may have to sand or adjust slotting depending upon your setup.
The trademarks, service marks or registered trademarks are those of their respective owners.
The parts on this site are made by or for Bitterroot Guitars.
These parts do not originate from the original OEM manufactures unless specifically identified as such.
Fender®, Strat®, Stratocaster®, Esquire®, Telecaster®, Tele®, Jazzmaster®, Jaguar®, Mustang®, P-Bass®, and J-Bass® are registered trademarks of Fender Musical Instruments Corporation.
Gibson®, Epiphone®, Les Paul®, S.G.®, Flying V®, ES-175®, ES-335® and P-90® are registered trademarks of Gibson Guitar Corporation
Kluson® is a registered trademark of W.D. Music Incorporated
LM®, SURELOCK® are registered trademarks of LM Products Company Incorporated
Lock-It® is a registered trademarks of Musical Distributors Group
Martin® is a registered trademark of Martin Guitar Company
S.I.T. Strings® is a registered trademark of S.I.T. Strings Company, Incorporated
The parts on this site are made by or for Bitterroot Guitars.
These parts do not originate from the original OEM manufactures unless specifically identified as such.
Fender®, Strat®, Stratocaster®, Esquire®, Telecaster®, Tele®, Jazzmaster®, Jaguar®, Mustang®, P-Bass®, and J-Bass® are registered trademarks of Fender Musical Instruments Corporation.
Gibson®, Epiphone®, Les Paul®, S.G.®, Flying V®, ES-175®, ES-335® and P-90® are registered trademarks of Gibson Guitar Corporation
Kluson® is a registered trademark of W.D. Music Incorporated
LM®, SURELOCK® are registered trademarks of LM Products Company Incorporated
Lock-It® is a registered trademarks of Musical Distributors Group
Martin® is a registered trademark of Martin Guitar Company
S.I.T. Strings® is a registered trademark of S.I.T. Strings Company, Incorporated
1 Review Hide Reviews Show Reviews
-
Had a problem with one nut to thin on one side ijection moulding problem .
Cheryl at customer service sent me a new one right away..These 1.5 inch nuts are hard to find.
