Nut, Flat Bottom, 1 47/64", Brass

44-43mm, for Electric Guitars 12" radius, Right Hand

Natural Brass Finish

Pre-Slotted string locations.

Specifications:

Right Hand 6 string guitar setup

Natural Die Cast Brass Part

Unique design allows you to install as a 44mm or a 43mm nut with sandind and adjustment.

1.74" electric setup (44mm, 1 47/64")
Bevel on rear to go to to a wider headstock.
Can be sanded or filed to 1.693" acoustic setup (43mm, 1 11/16")
Brass metal nut
Pre-slotted for standard string setup

Overall width 1.74" (1 47/64" 44.2mm)
Overall Depth is .203" (13/64" 5.2mm)
Overall height at string 1 (high E) - 0.321" (slightly over 5/16" 8.1mm)
Overall height at string 6 (low E) - 0.335" (slightly over 21/64" 8.5mm)
Upper radius (string) is approximately 12"
String Spread 1.385" (1 3/8" 35.2mm)
Bottom edge is flat

This product is a die cast molded brass nut.

Please note: due to the variations in guitar setups, you may need to sand or adjust this part to fit your specific guitar. There are a number of radius and bottom setups, widths and other details that vary from guitar manufacturers, if you have questions, please email us, we will try to answer your questions as to fit, we cannot guarantee fit for specific guitars, there are so many variations from year to year and model to model.

You may need to adjust this product to fit your specific application. This could including filing and sanding to fit.




This Product may contain a chemical known to the State of California to cause cancer and/or birth defects or other reproductive harm.
For more info go to www.P65Warnings.ca.gov