Nut, Flat Bottom, 1 11/16", Right Hand, Bone

43mm, for 4 String Base 9 1/2" radius, Right Hand

Natural Bone material

1.703"w (1 11/16" 43.3mm)
0.367"h (just over 23/64" 9.3mm)
0.235"d (15/64" 6mm)

Radius 9 1/2"

Specifications:

Right Hand 4 string bass guitar setup

Natural Bone Material

1.703" acoustic setup (43.3mm, just over 1 11/16")
Bone nut
Pre-slotted for standard string setup

Overall width 1.703" (just over 1 11/16" 43.3mm)
Overall Depth is .235" (15/64" 6mm)
Height is .367" (just over 23/64" 9.3mm)
Overall height at string 1 - 0.326" (21/64" 8.3mm)
Overall height at string 4 - 0.355" (slightly under 23/64" 9mm)
Upper radius (string) is approximately 9.5"
String Spread 1.337" (1 11/32" 34.0mm)
Bottom edge is flat

This product is a carved natural bone material nut.

Please note: due to the variations in guitar setups, you may need to sand or adjust this part to fit your specific guitar. There are a number of radius and bottom setups, widths and other details that vary from guitar manufacturers, if you have questions, please email us, we will try to answer your questions as to fit, we cannot guarantee fit for specific guitars, there are so many variations from year to year and model to model.

You may need to adjust this product to fit your specific application.




This Product may contain a chemical known to the State of California to cause cancer and/or birth defects or other reproductive harm.
For more info go to www.P65Warnings.ca.gov

Pre-Slotted string locations.