Guitar Nut Right Hand 43.2mm
Bone
0.241" Thickness (6.1mm (just over 15/64")
0.325" Height (21/64" or 8.3mm) in middle
1.70" length (1 45/64" or 43.2mm)
This is a bone nut, the product is formed with Bone material.
It is pre-shaped and pre-sized.
This product is produced for Bitterroot Guitars.
We are not associated with the original manufacturer, these parts originate from our suppliers only.
Specifications:
Oxen Bone Nut
0.241" thickness (6.1mm or just over 15/64")
0.325" height (21/64" or 8.3mm) in middle
1st string height is 0.287" (just over 9/32" (7.3mm)) at top edge of nut
6th string height is 0.306" (7.7mm (just over 19/64"))
1.70" width (1 45/64" or 43.2mm)
String spread is 1.34" (approximately 1 11/32") Typical for width of nut
String slots are set for 10-46 gauge cut.
Radius 9.5"
Depending on your guitar, you may have to sand for height or adjust string slot cut for setup.
Natural Material.
Please note: This product is an aftermarket product. It does not originate from the original manufacturer, this reference is only for purposes of identifying application for the part.
The parts on this site are made by or for Bitterroot Guitars.
These parts do not originate from the original OEM manufactures unless specifically identified as such.
Fender®, Strat®, Stratocaster®, Esquire®, Telecaster®, Tele®, Jazzmaster®, Jaguar®, Mustang®, P-Bass®, and J-Bass® are registered trademarks of Fender Musical Instruments Corporation.
Gibson®, Epiphone®, Les Paul®, S.G.®, Flying V®, ES-175®, ES-335® and P-90® are registered trademarks of Gibson Guitar Corporation
Kluson® is a registered trademark of W.D. Music Incorporated
LM®, SURELOCK® are registered trademarks of LM Products Company Incorporated
Lock-It® is a registered trademarks of Musical Distributors Group
Martin® is a registered trademark of Martin Guitar Company
S.I.T. Strings® is a registered trademark of S.I.T. Strings Company, Incorporated