This set is for 9 pieces of approximately 1/16" thick inlay.
Enough material to allow all fret board radius and sanding of the fret board.

Arrows can be set up (as shown or down)

Pieces are: (approximate sizes and will vary some due to the nature of the product)

#1 0.908" wide (29/32" or 23.1mm) by 0.751" high (3/4" or 19.1mm)

#2 1.029" wide (just under 1 1/32 or 26.1mm) by 0.673" high (43/64" or 17.1mm)

#3 1.104" wide (just under 1 7/64" or 28mm) by  0.592" high (19/32" or 15mm)

#4 1.145" wide (1 9/64" or 29.1mm) by 0.475" high (15/32" or 12.1mm)

#5 1.224" wide (1 7/32" or 31.1mm) by 0.353" high (11/32" or 9mm)

#6 1.302" wide (1 19/64" or 33.1mm) by 0.277" high (17/64" or 7mm)

#7 1.383" wide (1 3/8" or 35.1mm) by 0.239" high (15/64" or 6.1mm)

#8 1.383" wide (1 3/8" or 35.1mm) by 0.239" high (15/64" or 6.1mm)

#9 1.383" wide (1 3/8" or 35.1mm) by 0.239" high (15/64" or 6.1mm)

PLEASE NOTE: This is a natural product, the photo shown is a representation of the product, color, hue and other details will vary from piece to piece due to natural variations in the shell. Sizes may vary slightly, we recommend working and cutting from the exact part, not precutting the fretboard. 

The pieces are sized for assembly but you may need to adjust to your specific detail and primed on the rear for bonding. 

This does require a skill level for inlay and fret work. It is not recommended for direct replacement part unless you have the skills to do the work.

Please contact us with questions regarding this product.