Kluson String Tree Guides for many
American series setups
Quality low profile string trees.
Chrome Finish
Specification:
Overall Height is 9mm (23/64")
Guide height is (from headstock to under side of guide) 6.35mm (1/4")
Overall length is 10.3mm (13/32")
Overall width at base is 5mm (slightly larger than 3/16")
Overall width on the guides is 11mm (7/16")
Mounting pin center location is 2.54mm (slightly less than 7.64") off the center of the screw hole.
Mounting pin diameter is 1.7mm (approximately 1/16")
Mounting pin length is 2.4mm (approximately 3/32")
These are listed by the manufacture as a direct replacement for a number of American made OEM guitar setups. We cannot guarantee this will fit every application, please check the photo and dimensions to make sure this will fit your application.
Please note: While this is listed as a roller string tree, the "roller" pins are fixed and do not roll, they are simply a guide for the string to pass under.
Overall Height is 9mm (23/64")
Guide height is (from headstock to under side of guide) 6.35mm (1/4")
Overall length is 10.3mm (13/32")
Overall width at base is 5mm (slightly larger than 3/16")
Overall width on the guides is 11mm (7/16")
Mounting pin center location is 2.54mm (slightly less than 7.64") off the center of the screw hole.
Mounting pin diameter is 1.7mm (approximately 1/16")
Mounting pin length is 2.4mm (approximately 3/32")
These are listed by the manufacture as a direct replacement for a number of American made OEM guitar setups. We cannot guarantee this will fit every application, please check the photo and dimensions to make sure this will fit your application.
Please note: While this is listed as a roller string tree, the "roller" pins are fixed and do not roll, they are simply a guide for the string to pass under.
The trademarks, service marks or registered trademarks are those of their respective owners.
The parts on this site are made by or for Bitterroot Guitars.
These parts do not originate from the original OEM manufactures unless specifically identified as such.
Fender®, Strat®, Stratocaster®, Esquire®, Telecaster®, Tele®, Jazzmaster®, Jaguar®, Mustang®, P-Bass®, and J-Bass® are registered trademarks of Fender Musical Instruments Corporation.
Gibson®, Epiphone®, Les Paul®, S.G.®, Flying V®, ES-175®, ES-335® and P-90® are registered trademarks of Gibson Guitar Corporation
Kluson® is a registered trademark of W.D. Music Incorporated
LM®, SURELOCK® are registered trademarks of LM Products Company Incorporated
Lock-It® is a registered trademarks of Musical Distributors Group
Martin® is a registered trademark of Martin Guitar Company
S.I.T. Strings® is a registered trademark of S.I.T. Strings Company, Incorporated
The parts on this site are made by or for Bitterroot Guitars.
These parts do not originate from the original OEM manufactures unless specifically identified as such.
Fender®, Strat®, Stratocaster®, Esquire®, Telecaster®, Tele®, Jazzmaster®, Jaguar®, Mustang®, P-Bass®, and J-Bass® are registered trademarks of Fender Musical Instruments Corporation.
Gibson®, Epiphone®, Les Paul®, S.G.®, Flying V®, ES-175®, ES-335® and P-90® are registered trademarks of Gibson Guitar Corporation
Kluson® is a registered trademark of W.D. Music Incorporated
LM®, SURELOCK® are registered trademarks of LM Products Company Incorporated
Lock-It® is a registered trademarks of Musical Distributors Group
Martin® is a registered trademark of Martin Guitar Company
S.I.T. Strings® is a registered trademark of S.I.T. Strings Company, Incorporated
