Music Nomad Fret Leveler - Leveling (L-Beam) 17.6 (45cm) for Acoustic and Electric Guitar
Leveling your frets and fingerboard has never been easier with MusicNomad's Fret Leveler L-Beam. 17.6" (45cm), no detail was overlooked from top to bottom in creating a new higher standard. Our unmatched thicker wall design lets the weight of the leveler do the work for you. Our exclusive ergonomic curved handle design gives you the ultimate comfort and control, plus helps avoid slipping out of your hand. Our radius beveled edges keep you from banging into and damaging high frets. Most importantly, the top and bottom smooth flat edges go through a 3-step precision grinding process with an accuracy tolerance of +/-.00125" per foot. We even include a convenient hang hole and three Adhesive-backed 3M™ Stikit™ Gold Abrasive strips, the preferred choice for top repair shops: (2) P240 Grit, (1) P400 Grit. That's MusicNomad quality - raising the bar in equipment care.
Product Features
OUR 17.6" (45cm) FRET LEVELER SETS A NEW HIGHER STANDARD for what you should expect when you buy a Fret Leveling Beam for Acoustic and Electric Guitars. This longer 17.6" size, compared to the common 16" length found in other designs, is the perfect length to cover and level all the frets, ensuring precise accuracy with fewer strokes. Great for leveling unfretted fingerboards too!
UNMATCHED THICKER WALL DESIGN GIVES YOU THE WEIGHT YOU WANT: We beefed up our design so the weight of the leveler does the work for you. The 17.6" L-Beam is in a weight class by itself at 1.435 lbs (651g).
EXCLUSIVE ERGONOMIC HANDLE + ROUNDED BEVELED EDGES: The 17.6" L x 1.00" W x 1.75" H features our MusicNomad exclusive ergonomic curved handle design for the ultimate comfort and control, plus helps avoid slipping out of our hand. Our 1.75" lower profile height gets you closer to the fretboard for better control and feel. We even spent the extra time to radius the edges to keep you from banging into and damaging high frets. This a detail you will appreciate.
SMOOTH FLAT EDGES & SANDPAPER INCLUDED: Top and Bottom Edges are precision ground to a flat accuracy tolerance of +/-.00125" per foot via a strategically designed 3-step grinding process on each work surface. We include three Adhesive-backed 3M™ Stikit™ Gold Abrasive strips, the preferred choice for top repair shops: (2) P240 Grit, (1) P400 Grit.
DESIGNED BY OUR SONOMA, CA (USA) TEAM: The premium quality 6063-T5 Aluminum has a blue anodized finish that is extremely durable, abrasion resistant, easy to clean and does not peel or chip. Convenient hang hole included.
Luthier Tool
Designed for fret leveling
17.6" long
Comes with 2 240 grit Sandpaper and 1 400 grit sandpaper
Specifications:
Contoured for easier handling.
Hang hole to storage.
Two Precision machined edges
Works for most guitars, mandolins, banjos, bass and dulcimer
Dimensions:
Length 17.6"
Width: .1"
Height 1.75"
Auminum part
The parts on this site are made by or for Bitterroot Guitars.
These parts do not originate from the original OEM manufactures unless specifically identified as such.
Fender®, Strat®, Stratocaster®, Esquire®, Telecaster®, Tele®, Jazzmaster®, Jaguar®, Mustang®, P-Bass®, and J-Bass® are registered trademarks of Fender Musical Instruments Corporation.
Gibson®, Epiphone®, Les Paul®, S.G.®, Flying V®, ES-175®, ES-335® and P-90® are registered trademarks of Gibson Guitar Corporation
Kluson® is a registered trademark of W.D. Music Incorporated
LM®, SURELOCK® are registered trademarks of LM Products Company Incorporated
Lock-It® is a registered trademarks of Musical Distributors Group
Martin® is a registered trademark of Martin Guitar Company
S.I.T. Strings® is a registered trademark of S.I.T. Strings Company,
