Coordinator Rod for Banjo builders

Made of nickel-plated steel, these 2 rods measure 9 3/4″ in length and are designed for old and new banjos that utilize a 1-piece flange. Includes one L-shaped flange and all other necessary hardware (nuts, bolts and washers.)

Adjustable 9 3/4" coordinator rod

This coordinator rod set is the most common set you'll find for banjos. Restore your banjo or upgrade to our high-quality rods and easily adjust to reduce buzz. It includes both the inner and outer rods. Comes in nickel-plated.

This Product may contain a chemical known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more info go to www.P65Warnings.ca.gov

Designed for Banjos

Specifications:

Two rod set.

2 9 3/4" long rods with different thread setups for different builds.

9 3/4" Length plus hanger bolt, coupler, washers, nuts and flange.

Adjustable rod with M8 x 1.25mm thread on one end, M6 x 1.00mm thread and hanger bolt.
Contains, 2 Rods with thread, 2 Washers (M8), one M6 and 3 M8x1.25mm nut, 2 hanger bolt is thread a M6 x 1.00mm with 2 washers and 1 coupler nut.

Overall length is 9.625" plus hanger bolt and/or coupler

Nickel finish

A PDF Version of the drawing for this is available, please email us for information.

Warranty for this rod is limited to replacement of the rod. or a refund on the product itself. Bitterroot Guitars is not responsible for repair or replacement of any banjo rim or neck due to installation or product failure. Warranty is limited to replacement or refund of the rod itself or the original cost of the rod. Any modifications to the rod void this warranty. Please contact us if you have an issue with any of our rods.

This Product may contain a chemical known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more info go to www.P65Warnings.ca.gov

The trademarks, service marks or registered trademarks are those of their respective owners.

The parts on this site are made by or for Bitterroot Guitars.

These parts do not originate from the original OEM manufactures unless specifically identified as such.

Bitterroot Guitars is a trademark of Bitterroot Guitars.

Fender®, Strat®, Stratocaster®, Esquire®, Telecaster®, Tele®, Jazzmaster®, Jaguar®, Mustang®, P-Bass®, and J-Bass® are registered trademarks of Fender Musical Instruments Corporation.

Gibson®, Epiphone®, Les Paul®, S.G.®, Flying V®, ES-175®, ES-335® and P-90® are registered trademarks of Gibson Guitar Corporation

Kluson® is a registered trademark of W.D. Music Incorporated

LM®, SURELOCK® are registered trademarks of LM Products Company Incorporated

Lock-It® is a registered trademarks of Musical Distributors Group

Martin® is a registered trademark of Martin Guitar Company

S.I.T. Strings® is a registered trademark of S.I.T. Strings Company, Incorporated

PLEASE NOTE: We recommend you bench test the rod prior to installation in your neck. While we do not have many issues with the performance of this rod, but it is a good idea to check the rod prior to installation. Bench testing can be down by placing each end of the rod in a vise and moving the rod in a normal range of motion and beyond to check the rod. After installation the rod can be very difficult to remove or repair. We test all rods here in the US, but we do suggest this additional step to insure the rod is working correctly prior to placement in the neck. Warranty for this rod is limited to replacement of the rod.or a refund on the product itself. Bitterroot Guitars is not responsible for repair or replacement of any guitar or neck due to installation or product failure. Warranty is limited to replacement or refund of the rod itself and the original cost of the rod. Any modifications to the rod void this warranty. Please contact us if you have an issue with any of our rods.