Guitar Neck, Paddlehead setup. T Style Heel
25.5" Scale
56mm heel width
Carve your own headstock, paddlehead design, allows you to create your own custom headstock.
Maple neck with maple fretboard
Please note: due to the natural wood used, there will be variations from the photos shown. If you need additional information, please contact us prior to ordering.
Please note: This neck is slotted for a nut, but does not include the nut, allowing you to insert your choice of nut.
Guitar Neck, Paddlehead setup T Style Heel
Specifications:
Maple neck with Maple Fret board
T Style Heel setup 56mm (2.198")
12" Radius
25.5" Scale
Heel Width is approximately 56mm (2.198"), some variations will occur due to hand production.
Polyurethane finish, gloss
Fret wires are .106" wide, Wide/medium form. Frets are polished and finished on edges.
Neck is C Radius .91" at fret 1, .899" at frret 12
Overall heel height is 1.05"
Bottom of Fret board to bottm of heel is .80" approximately
Truss rod is adjusted from Headstock
Truss rod is two way rod.
Nut slot is 2 5/8" (41.5mm), it is 1/8" in thickness, flat bottom.
Paddlehead stock design, use as is, or carve to meet your needs, 3.5" at widest and 2.5" at top end of headstock
Mounting holes are bored at 7.6mm (19/64") for offset style tuners or you can bore out to other dimensions for your needs.
Black Inlay Dots
PLEASE NOTE: The product is slotted for a nut, but does not include the nut, allowing you to create your own setup.
PLEASE NOTE: If you are using 10mm tuners, you will have to bore or ream the tuner mounting holes to fit your application. This product has 7.5mm tuner holes pre-bored to allow the widest use of applicable tuners.
Specifications:
Maple neck with Maple Fret board
T Style Heel setup 56mm (2.198")
12" Radius
25.5" Scale
Heel Width is approximately 56mm (2.198"), some variations will occur due to hand production.
Polyurethane finish, gloss
Fret wires are .106" wide, Wide/medium form. Frets are polished and finished on edges.
Neck is C Radius .91" at fret 1, .899" at frret 12
Overall heel height is 1.05"
Bottom of Fret board to bottm of heel is .80" approximately
Truss rod is adjusted from Headstock
Truss rod is two way rod.
Nut slot is 2 5/8" (41.5mm), it is 1/8" in thickness, flat bottom.
Paddlehead stock design, use as is, or carve to meet your needs, 3.5" at widest and 2.5" at top end of headstock
Mounting holes are bored at 7.6mm (19/64") for offset style tuners or you can bore out to other dimensions for your needs.
Black Inlay Dots
PLEASE NOTE: The product is slotted for a nut, but does not include the nut, allowing you to create your own setup.
PLEASE NOTE: If you are using 10mm tuners, you will have to bore or ream the tuner mounting holes to fit your application. This product has 7.5mm tuner holes pre-bored to allow the widest use of applicable tuners.
This Product may contain a chemical known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more info go to www.P65Warnings.ca.gov
The trademarks, service marks or registered trademarks are those of their respective owners.
The parts on this site are made by or for Bitterroot Guitars.
These parts do not originate from the original OEM manufactures unless specifically identified as such.
Fender®, Strat®, Stratocaster®, Esquire®, Telecaster®, Tele®, Jazzmaster®, Jaguar®, Mustang®, P-Bass®, and J-Bass® are registered trademarks of Fender Musical Instruments Corporation.
Gibson®, Epiphone®, Les Paul®, S.G.®, Flying V®, ES-175®, ES-335® and P-90® are registered trademarks of Gibson Guitar Corporation
Kluson® is a registered trademark of W.D. Music Incorporated
LM®, SURELOCK® are registered trademarks of LM Products Company Incorporated
Lock-It® is a registered trademarks of Musical Distributors Group
Martin® is a registered trademark of Martin Guitar Company
S.I.T. Strings® is a registered trademark of S.I.T. Strings Company
The parts on this site are made by or for Bitterroot Guitars.
These parts do not originate from the original OEM manufactures unless specifically identified as such.
Fender®, Strat®, Stratocaster®, Esquire®, Telecaster®, Tele®, Jazzmaster®, Jaguar®, Mustang®, P-Bass®, and J-Bass® are registered trademarks of Fender Musical Instruments Corporation.
Gibson®, Epiphone®, Les Paul®, S.G.®, Flying V®, ES-175®, ES-335® and P-90® are registered trademarks of Gibson Guitar Corporation
Kluson® is a registered trademark of W.D. Music Incorporated
LM®, SURELOCK® are registered trademarks of LM Products Company Incorporated
Lock-It® is a registered trademarks of Musical Distributors Group
Martin® is a registered trademark of Martin Guitar Company
S.I.T. Strings® is a registered trademark of S.I.T. Strings Company
